China Wire Annealing Furnace Factory since 1999
Wire Annealing Furnace mainly process wire with high temperature 1000℃. Kehan Steel wire annealing furnace is featured by customized process, smooth working and less maintenance. Continuous wire annealing furnace is widely applied in steel wire products factory. You can anneal small bobbin wire, big wire coils and straight & cut to length wires with wire annealing furnace. Kehan Wire annealing furnace temperature can be preset through HMI system and integrated control panel. You can handle wire annealing furnace easily. You can also get customization solution for wire annealing furnace. Kehan is able to supply to you the wire annealing furnace with outstanding technological and quality advantages.
Wire Annealing Furnace
Chinese Reliable Wire Annealing Furnace Expert
- Parameter
| Model | THL2-300-2 |
| Effective dimensions | 1500×2700×2100（mm） |
| Overall dimensions | 1700×3500×2200(mm) |
| Wire loading space | 1200×2050 (mm) *2 |
| Furnace foundation pit size | 2600W×4800L×2400H (mm) |
| Common temperature | 950 degrees |
| Electrical control system | PID intelligent control/ 7-inch color touch screen control |
| Theoretical loading capacity | 17T |
Annealing Furnace Working
Kehan Wire annealing furnace is easy to be operated. You can place the workpiece into the furnace, then start the heating element to heat it. Annealing temperature curve can be customized and preset. You are able to monitor and adjust furnace temperature in time to ensure that the workpiece is heated evenly and steadily. After the process is complete, you can lift the furnace cover and take out the workpiece with crane easily.
Annealing Furnace Design
Kehan furnace lining is made of high-temperature resistant modules floored flat and stacking in furnace frame. It assures you of high-performance heat insulation. Load-bearing part of the furnace bottom is made of heavy-duty high-alumina bricks. The heating elements are made of 0Cr25AL5 alloy resistance strip (produced by Capital Steel). It is processed into a wavy shape and suspended on the furnace lining, with high-alumina ceramic nails for positioning. All designs helps you for good annealing process.
Annealing Furnace Temperature
The temperature range of a well-type annealing furnace is usually between 200°C and 1200°C. The heating rate of Kehan well-type annealing furnace is typically between 10°C/min and 100°C/min. The highest temperature assists you to anneal different metal materials. Kehan designs reasonable heating rate for annealing furnace. You can get required annealing effect and improve production efficiency.
Kehan Wire Annealing Furnace can be easily discharged by top crane on ground. You can layout wire annealing furance above ground for fast commission without extra work.
You can also dig pit to bury anealing furnace half or fully underground for easy material loading. Kehan annealing furance assures you of smooth working and annealing process.
The wire annealing furnace price is primarily calculated in the basis of furnace capacity, number of linear, and material of linear. For example, double block annealing furnace is different from the single block annealing furnace. The annealing furnace with 304 stainless steel linear is much priced than that of aluminizing linear. Kehan offers the discount annealing furnace price to save your cost if you order six linear.
Kehan shares wire annealing furnace diagram together with all technical document after you confirm the oder. Generally, annealing furnace diagram is different because of different furnace design. Kehan designs the diagram of wire annealing furnace for each order and you can operate annealing furnace smooth with diagram support.
Kehan designs and manufacture bright annealing furnace for easily oxidized materials like steel wire, stainless steel wire, and copper wire. Annealing furnace can avoid the oxide and surface decarburization and formation of oxide film through heat treatment for the metal wire. In this way, Kehan brightening annealing furnace helps you make brightening wires.
You need to prepare building material, common tool, forklift or top crane, power supply and other necessary items for furnace installation. Building material includes cement, bricks, steel rebars for the foundation pit wall construction.Building tools covers mini excavators, loaders, dump trucks, shovels, picks, crowbars, spanner, pliers, screwdriver, Level, steel ruler, plate vibrator, etc.
Wire annealing furnace is featured by vertical loading material, less deformation, average temperature, and adjustable annealing temperature. The wire annealing furnace is ideal to process the all types of metal wire, metal rods, long products axis, poles. You can handle brightening annealing for the coil product of steel wire, stainless steel wire, copper wire in your factory.
